ULTRA LOW VOC SEALANT
SPECIFICATIONS
FINISH BASE APPLY WITH COVERAGE
Satin, Semi-Gloss
Water based
Coverage will vary with surface porosity and material. For best results, apply two thin coats.
400 sq. ft./gallon (smooth surface)
250 to 350 sq. ft./gallon (rough surface)
60-100 sq.ft./quart
PRODUCT DESCRIPTION
Ultra-low VOC sealant is a premium water-based crystal clear quality, fast-curing paint designed for interior surfaces where a durable finish and superior film formation are needed. Formulas are uniquely designed for optimal indoor air quality and minimal exposure to chemical toxicity. They are ideally suited for areas in which the health of occupants is of particular concern, including schools, hospitals, homes, and offices.
Ultra Low VOC contains no formaldehyde ammonia, aromatic hydrocarbon compounds, exempt solvents, or hazardous air pollutants. This acrylic urethane sealant provides a tough, durable surface for exterior use on walkways, floors and patios.
Light Chemical Resistant | Stain Resistant | Abrasion Resistant | Non Yellowing | Repels Oil, Grease, & Water
RECOMMENDED USAGE
= recommended for interior
= suitable for exterior
Top Coat for Terracotta
Satin Natural Terracotta
Organic Terracotta
Pressed Terracotta
D’Hanis Terracotta
Preliminary Top Coat for Terracotta
Organic Terracotta
PHYSICAL DATA
- Viscous: milky liquid
- % Volatile by Volume: 71.25%
- Solubility in Water: Dilutable
- Volatile by Weight: 67.68%
- VOC Material: 9 g/l
- VOC Material less H20: 36 g/l
- HAP’s (Hazardous Air Pollutants): zero
SURFACE PREPERATION
Always be sure surface is clean, dry, and free from any dirt, grease, oil, wax, or other contaminant. Read the entire label on bottle before using. Use only as directed. Always test on a small piece of material or a small inconspicuous area to determine suitability. Ideal surface temperature should be between 60°F and 80°F.
APPLICATION
Always be sure surface is clean, dry, and free from any dirt, grease, oil, wax, or other contaminant. Read the entire label on bottle before using. Use only as directed. Always test on a small piece of material or a small inconspicuous area to determine suitability. Ideal surface temperature should be between 60°F and 80°F.
For all sealants, we recommend testing a small area of your project before the application or entire project area.
APPLICATION METHOD: dampen yellow sponge with sealant and apply very fine layers of sealant application. Wipe up any milky residue with clean cotton cloth. Leaving milky white puddles or streaks may lead to improper adhesion and result in flaking.
DO NOT SHAKE. Shaking will cause air bubbles. Stir gently and thoroughly before application. This product appears milky when wet, but dries rapidly to a beautiful
clear coating. Thinning is not recommended.
IMPORTANT: Do not apply late in the day or when dew, rain, fog, or mist is likely (moisture will damage the fresh film). Apply at temperatures above 50 degrees F. Do not apply if temperatures below 45 degrees are expected within 24 hours. Cold weather excess humidity or a sudden temperature drop will greatly affect any finish at the time of application. Dampness can dull the gloss. Do not paint in direct sun. Use a clean brush or roller. For maximum durability, we recommend at least two thin coats.
Drying Time: Dry to the touch within 30 minutes. Wait 4 hours before re-coating. Ready for use in 12 hours. Drying time will vary with weather conditions, air circulation, and temperature. The more time you can allow, the better
Clean-up: Clean tools and hands with warm soapy water and rinse thoroughly.
FIRST AID | STORAGE AND HANDLING
Eye Contact: Flush eyes with water. Seek medical attention if irritation persists.
Skin Contact: Wash with soap and water. Seek medical attention if irritation persists.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Immediately seek a medical professional. Never give anything by mouth to an unconscious person. Rinse mouth with water. Seek medical attention if symptoms appear.
Handling: Do not get in eyes. Keep the container closed and tightly sealed when not in use. If you are chemically sensitive, always test for personal tolerance.
Storage: Keep in tightly closed, properly labeled containers. Keep in a cool, well-ventilated place.
PENETRATING SEALANT
SPECIFICATIONS
FINISH BASE APPLY WITH
Transparent finish
(Retains original sheen and color)
Solvent based
COVERAGE
- For Glazed Tile or Pre-sealed terracotta: 1st coat: 100-200 SF/gallon. 2nd coat 250-400 SF/gallon.
- For Cotto and Glazed tile for exterior: 1st coat: 200-300 SF/gallon. 2nd coat 400+ SF/gallon
- For Organic Terracotta, Terracotta Pavers, or dip sealing for exterior: 1.5x avg. density coverage Generally, the sealer will go twice as far on the 2nd coat as it did on the 1st coat. A second coat can be applied immediately after the first.
PRODUCT DESCRIPTION
PENETRATING SEALANT is a clear solvent-based penetrating water and oil repellant. Penetrating Sealant provides oleophobic protection as well as water repellency making it ideal for long-term protection against food, oil, and water stains. Penetrating Sealant dries clear and non-glossy and does not form a surface film. Treated surfaces retain a natural appearance, inhibit efflorescence, penetrate deeply and immediately, and are an excellent grout release. For interior or exterior use.
Light Chemical Resistant | Stain Resistant | Abrasion Resistant | Non Yellowing | Repels Oil, Grease, & Water
RECOMMENDED USAGE
suitable for interior
suitable for exterior
suitable for wet area
Top Coat for Glazed Tile
Top Coat for Terracotta
Primary and Top Coat
Glazed Clay
Glazed Terracotta
Glazed Relief
Pattern Clay
Glazed tile | waterline or fountain
Matte Natural Terracotta
Satin Natural Terracotta
Gloss Natural Terracotta
Organic Natural Terracotta
D’Hanis Terracotta
Pressed Terracotta
Terracotta Pavers
Cotto
Breeze Blocks
PHYSICAL DATA
- Appearance : Clear liquid
- Solubility: N/A
- VOC: 0.58 lb./gallon, 69.58 g/L
SURFACE PREPERATION
Always be sure surface is clean, dry, and free from any dirt, grease, oil, wax, or other contaminant. Read the entire label on bottle before using. Use only as directed. Always test on a small piece of material or a small inconspicuous area to determine suitability. Ideal surface temperature should be between 60°F and 80°F.
APPLICATION
Always be sure the surface is clean, dry, and free from any dirt, grease, oil, wax, or other contaminant. Read the entire label on the bottle before using it. Use only as directed. Always test on a small piece of material or a small inconspicuous area to determine suitability. The ideal surface temperature should be between 60°F and 80°F.
For all sealants, we recommend testing a small area of your project before the application or entire project area to ensure proper appearance and adhesion.
APPLICATION METHOD: Penetrating Sealant may be applied with a spray applicator, brush, roller, or lint-free rag. Wipe off excess from the tile surface. Do not leave voids and puddles. For sealing grout joints: Apply to the joint with a small brush or squeeze bottle. Allow to soak for 10-15 mins.
DO NOT SHAKE. Shaking will cause air bubbles. Stir gently and thoroughly before application. This product appears milky when wet, but dries rapidly to a beautiful
clear coating. Thinning is not recommended.
IMPORTANT: Do not apply late in the day or when dew, rain, fog, or mist is likely (moisture will damage the fresh film). Apply at temperatures above 50 degrees F. Do not apply if temperatures below 45 degrees are expected within 24 hours. Cold weather excess humidity or a sudden temperature drop will greatly affect any finish at the time of application. Dampness can dull the gloss. Do not paint in direct sun. Use a clean brush or roller. For maximum durability, we recommend at least two thin coats.
Drying Time: Wait 4 hours before re-coating. Penetrating Sealant cures completely in 2-7 days. Drying time will vary with weather conditions, air circulation, and temperature. The more time you can allow, the better
Clean-up: Clean tools and hands with warm soapy water and rinse thoroughly.
Maintenance Application: High-traffic areas can easily be spot-treated when required because Penetrating Sealant does not build up or alter the appearance of the surface.
FIRST AID | STORAGE AND HANDLING
Eye Contact: Flush eyes with water. Seek medical attention if irritation persists.
Skin Contact: Wash with soap and water. Seek medical attention if irritation persists.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Immediately seek a medical professional. Never give anything by mouth to an unconscious person. Rinse mouth with water. Seek medical attention if symptoms appear.
Handling: Do not get in eyes. Keep the container closed and tightly sealed when not in use. If you are chemically sensitive, always test for personal tolerance.
Storage: Keep in tightly closed, properly labeled containers. Keep in a cool, well-ventilated place.
POLISH TOP COAT
SPECIFICATIONS
FINISH APPLY WITH COVERAGE
High Gloss
400-500 SF / Gallon
PRODUCT DESCRIPTION
POLISH TOP COAT is a water-based self-polishing floor finish designed to be used over most sealers. Polish Top Coat dries to a crystal clear, scuff resistant coating which will protect and prolong the life of the sealer below. Polish Top Coat is used as a regular maintenance product to refresh the appearance of a floor. Use when a glossy look is desired. For interior use only.
RECOMMENDED USAGE
= recommended for interior
Polish Top Coat for Terracotta
Gloss Natural Terracotta
Organic Terracotta
PHYSICAL DATA
- Appearance: White liquid
- Solubility: Soluble in water
- VOC: 0.29 lb/gallon, 34.9 g/L
SURFACE PREPERATION
Always be sure surface is clean, dry, and free from any dirt, grease, oil, wax, or other contaminant. Read the entire label on bottle before using. Use only as directed. Always test on a small piece of material or a small inconspicuous area to determine suitability. Ideal surface temperature should be between 60°F and 80°F.
APPLICATION
Clean tiles with Palo Santo Cleaner. Rinse surface with clean water. Let surface dry. Pour ample amount of Polish Top Coat into a clean pail or bucket. Soak a clean, lint free cotton or rayon mop with the finish. Squeeze the ends of the mop to eliminate excessive dripping. Spread Polish Top Coat to the surface evenly, smoothly, and uniformly, overlapping each stroke. Let the weight of the mop apply the finish. Reload the mop with finish as needed. Do not leave puddles or voids. Work systematically and in small areas at a time. A second or third coat of Polish Top Coat may be applied, depending on the amount of gloss desired. Allow 30 minutes to an hour drying time between coats.
Apply a test area to ensure proper appearance and adhesion.
FIRST AID | STORAGE AND HANDLING
Eye Contact: Flush eyes with water. Seek medical attention if irritation persists.
Skin Contact: Wash with soap and water. Seek medical attention if irritation persists.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Immediately seek a medical professional. Never give anything by mouth to an unconscious person. Rinse mouth with water. Seek medical attention if symptoms appear.
Handling: Do not get in eyes. Keep the container closed and tightly sealed when not in use. If you are chemically sensitive, always test for personal tolerance.
Storage: Keep in tightly closed, properly labeled containers. Keep in a cool, well-ventilated place.
POLISH REMOVER
SPECIFICATIONS
APPLY WITH
PRODUCT DESCRIPTION
POLISH REMOVER is a top coat sealer stripper, it will easily remove undesirable layers of wax or floor finish with minimal effort. It has no offensive ammonia odors, and works quickly and efficiently. In most cases, the use of a floor machine is not necessary.
USAGE
For Heavy Buildup | Use 1-part Polish Remover to 1-part water
For Moderate Buildup | Use 1-part Polish Remover to 5 parts of water
For Mild Buildup | Use 1-part Polish Remover to 8-10 parts water
RECOMMENDED USAGE
PHYSICAL DATA
= interior use only
Removes Polish Top Coat (for reapplication)
Removal of Polish Top Coat
- Appearance: yellow colored liquid
- Solubility: Soluble in water
APPLICATION
Mop the floor using one of the above solutions. Apply liberally and allow to stand for 5 to 10 minutes, making sure the solution stays wet. Pick up the dissolved solution with a mop or wet-dry vacuum. Polish Remover is low foaming, therefore accelerating the rinsing operation. Works in hot or cold water. After the floor is thoroughly cleaned, rinse with clear water. Allow the floor to completely dry before applying the Polish Top Coat finish.
Apply a test area to ensure proper appearance and usage.
FIRST AID | STORAGE AND HANDLING
Eye Contact: Flush eyes with water. Seek medical attention if irritation persists.
Skin Contact: Wash with soap and water. Seek medical attention if irritation persists.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Immediately seek a medical professional. Never give anything by mouth to an unconscious person. Rinse mouth with water. Seek medical attention if symptoms appear.
Handling: Do not get in eyes. Keep the container closed and tightly sealed when not in use. If you are chemically sensitive, always test for personal tolerance.
Storage: Keep in tightly closed, properly labeled containers. Keep in a cool, well-ventilated place.
PALO SANTO | UNSCENTED CLEANER CONCENTRATE
APPLY WITH
PRODUCT DESCRIPTION
RECOMMENDED USAGE
Tile Cleaner
All Clay Imports Tiles
Specifically Terracotta Tiles
PHYSICAL DATA
- Appearance: Amber colored liquid
- Solubility: Soluble in water
- VOC: ZERO
PALO SANTO or UNSCENTED CLEANER CONCENTRATE are a uniquely formulated, heavy-duty, neutral pH cleaner designed for cleaning concentrate, and maintaining all types of surfaces. Many common household and heavy-duty cleaners can damage the surface of terracotta tiles. Palo Santo Cleaner for Terracotta Tiles does not contain abrasive ingredients but is strong enough to loosen and remove dirt and grime.
APPLICATION
This cleaner is a concentrate, meaning a quart can last quite a long time and clean a lot of surface area! To use appropriately, the concentrate needs to be mixed with water. Add ½ cup Palo Santo Cleaner to a pail of hot or cold water or 1 part concentrate to 4-5 parts water. Damp mop in the usual manner and clean. If floor is unusually dirty, let solution soak loose dirt, then pick up dirty solution, rinse, and let dry.
This cleaner can be used to clean any type of tile.
FIRST AID | STORAGE AND HANDLING
Eye Contact: Flush eyes with water. Seek medical attention if irritation persists.
Skin Contact: Wash with soap and water. Seek medical attention if irritation persists.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Immediately seek a medical professional. Never give anything by mouth to an unconscious person. Rinse mouth with water. Seek medical attention if symptoms appear.
Handling: Do not get in eyes. Keep the container closed and tightly sealed when not in use. If you are chemically sensitive, always test for personal tolerance.
Storage: Keep in tightly closed, properly labeled containers. Keep in a cool, well-ventilated place.